Principles:
The powder raw material and adhesive in a cylinder are mixed fully at the bottom to become a humid soft rnaterial, Then it is cut through high-speed crusher and becorne uniform granules.
Features:
1 The machine adopts horizontal cylinder structure. lts structure is reasonabIe.
2 Use air filIed seal shaft to drive. When washing. it can be taken place with water,
3 Use fluidization to Granulate and the granuIe is near ball, lts flow is good.
4 Compared the traditional process. 25% of adhesive can be reduced and the laying time can be shorted.
5 The tirne of rnixing in dry is 2 minutes and the time of g ranulating is 1 -4 minutes. Compared with the traditional process. 4-5 tirnes of efficiency is raised,
6 ln the same sealed container, dry mixing, hurnidity mixing and granulating can be finished. lt is in conformity with the requirements of GMP,
7 The whole operation has StriCt safe and protective

Technical Parameters:

Name	Type
	10	50	150	200	250	300	400	600
Capacity(l)	10	50	150	200	250	300	400	600
Output(kg/batch)	3	15	50	80	100	130	200	280
Admix speed(r.p.m)	300/600	200/400	180/270/	180/270	180/270	140/220	106/155	80/120
Admix power(kw)	1.5/2.2	4/5.5	6.5/8	9/11	9/11	13/16	18.5/22	22/30
Incise speed(r.p.m)	1500/3000	1500/3000	1500/3000	1500/3000	1500/3000	1500/3000	1500/3000	1500/3000
Incise power(kw)	0.85/1.1	1.3/1.8	2.4/3	4.5/5.5	4.5/5.5	4.5/5.5	6.5/8	9/11
Pressure air amount(m3/min)	0.6	0.6	0.9	0.9	0.9	1.1	1.5	1.8