The purpose and operation characteristics of the universal mill grinding
The universal grinder stainless steel, good corrosion resistance. Around the fully enclosed, easy to clean, and the processing of the case, the wall should be flat, smooth surface, medicine, food and chemical production more in line with national standards.
  When the material inlet into the machine immediately cast materials for high-speed rotation of the hammer (tooth slice), breaking hit a broken circuit board when the material in the crusher in a number of shocks and continuous pore size is small, the screen through the screen holes into the interior of the fan blades to rotate, resulting in negative pressure will be sucked out of the material blown by the fan blade designated settlement device
  Universal grinder with three times the activities in the spindle gear plate, above the grinding chamber and fixed-gear fixed, fixed-gear sets of double ring toothed ring gear. Activities Activities chainring chainring and the fixed ring gear intertwined. When high spindle speeds, activities chainring run, and material thrown into the gap between the head. In the material and the teeth or material influence on each other, shearing, friction integrated effect toothed roll crusher. Was crushed. Finished grinding chamber sieve into the capture bag the coarse materials continue to pieces. Raw materials can be used for grinding degree adjustment. Screen, universal grinder structure is simple, durable, easy to use and maintain, high output, and smooth operation.
  The universal grinder-use activities the chainring and fixed teeth disc see the high-speed relative motion, so crushed by the teeth of the impact, the combined effects of friction materials and their impact was crushed. The strong friction, the temperature rise of the material in the grinder in a large diameter, leading to dehydration. Crushed immediate release, resulting in excessive crushing waste of energy. The resulting particle size uniform.
  The grinder is applicable not only to dry and brittle material, also applies to the part of the toughness and the fibrous material.
  Material crushed by universal grinder to accomplish its purpose as follows:
  1, homogenized, large particulate material is crushed into a fine powder state: With pulverized, so as to make the several different chemical composition of the solid material were mixed to obtain a good uniform effect.
  Dissociation: With the development and utilization of mineral resources, while a useful component of many ore with impurities closely together for the ore into effective decomposition from only fully crushed, after dressing can be useful components and impurities separate pure concentrate and remove impurities.
  Classifier: solid raw materials in industrial production, due to the specific production process requirements, the more stringent size requirements.
Related News:
· Innovation, energy saving, environmental protectio  
· Vacuum dryer product performance characteristics a  
· Vacuum dryer used for inspection and debugging wor  
· Difficulties and reasons cannot start mixing machi  
· The correct operation method using vacuum dryer  
· Development advantages and characteristics of dome  
· The difference between the special vacuum dryer an  
· Detailed description of each component characteris  
· The dominant position in the whole vacuum dryer dr  
· Trough type mixer sometimes appear large area leak  
Related Products:
· PGL Spray Drying Granulator
· High speed mixer
· SET series double screw extrusion pelletizer
· VI forced mixer
· Mixing machine W series
· Powder machine ZSJ series vibrating screen
· FZ series of crushing granulator
· Chinese medicine grinder
· DWT series of drier for dehydrated vegetables
· Multi-layer belt dryer

Copyright 2013 Chang Zhou Zhizun Machinery Co.,Ltd All Rights Reserved.Design by Reach.
Tel:86.519-88906508 Fox:86.519-88902679 Add:Jiaoxi Changzhou Jiangsu Pro China P.C:213116