The universal grinder before checking steps
   1.The the universal grinder before inspection activities teeth screws are loose, loose must be tightened.
  2. Check the dust bag is installed.
  3. Spindle turned by hand before using universal grinder should be stuck phenomenon, the spindle should turn freely.
  4. Should be checked before use universal grinder machine cavity must be cleaned.
  5. Open Duster universal grinder first, and then open the grinder, contrary shutdown.
  6. The end of the day, you must clean the universal grinder machine cavity, the machine cavity without any debris.
  7. Every day to clean dust bag.
Related News:
· Innovation, energy saving, environmental protectio  
· Vacuum dryer product performance characteristics a  
· Vacuum dryer used for inspection and debugging wor  
· Difficulties and reasons cannot start mixing machi  
· The correct operation method using vacuum dryer  
· Development advantages and characteristics of dome  
· The difference between the special vacuum dryer an  
· Detailed description of each component characteris  
· The dominant position in the whole vacuum dryer dr  
· Trough type mixer sometimes appear large area leak  
Related Products:
· PGL Spray Drying Granulator
· High speed mixer
· SET series double screw extrusion pelletizer
· VI forced mixer
· Mixing machine W series
· Powder machine ZSJ series vibrating screen
· FZ series of crushing granulator
· Chinese medicine grinder
· DWT series of drier for dehydrated vegetables
· Multi-layer belt dryer

Copyright 2013 Chang Zhou Zhizun Machinery Co.,Ltd All Rights Reserved.Design by Reach.
Tel:86.519-88906508 Fox:86.519-88902679 Add:Jiaoxi Changzhou Jiangsu Pro China P.C:213116