The universal grinder before using should pay attention to steps
the universal grinder should do before the operation, several checking steps
  The ordinary coating the pan coating drying efficiency is low, dust pollution, the difference between run and long operating time, it is more in the pan improved, such as adding baffle the pan and tube spray package wok. Buried spray the pan is particularly suitable for aqueous dispersion coating liquid coating, the coating can greatly shorten the time.
  The ① operator should be aware of the structure of the universal grinder, the familiar universal grinder equipment performance and operating methods. Use universal grinder before checks the universal grinder all fasteners are tightened, the belt is tensioned. Spindle running direction must comply with the shield, as shown in the arrow direction, otherwise it will damage the universal grinder, and could cause personal injury. Check the electrical is complete.
  (2) must be confirmed no material before the start universal grinder machine. For some reason midway stop, start again before the high-speed universal grinder, feed must first smash indoor artificial discharge, non-load start grinder. Check the universal mill grinding hard debris such as indoor or without metal, otherwise they will bash tool, affecting the operation of universal grinder.
  ③ the shredders its ancillary equipment (no-load operation of transportation equipment and ventilation network) normal, carefully open the loading door, flow regulator fixed in the pulverizer rated operating current when. Cup of oil on the universal grinder should always be injected into the lubricating oil to ensure the normal operation of universal grinder.
  ④ work always observe the the universal grinder ammeter, and frequent check the flow control device to ensure universal grinder to work at rated load.
  ⑤ universal grinder to ground inspection, if found to contain whole or large grain feed, stop the sieve without damage. Regular inspection tool with the screen is damaged, if damaged, should be replaced immediately. Use universal grinder will have small vibration, must cover connecting the handle to tighten to avoid the accident.
Related News:
· Innovation, energy saving, environmental protectio  
· Vacuum dryer product performance characteristics a  
· Vacuum dryer used for inspection and debugging wor  
· Difficulties and reasons cannot start mixing machi  
· The correct operation method using vacuum dryer  
· Development advantages and characteristics of dome  
· The difference between the special vacuum dryer an  
· Detailed description of each component characteris  
· The dominant position in the whole vacuum dryer dr  
· Trough type mixer sometimes appear large area leak  
Related Products:
· PGL Spray Drying Granulator
· High speed mixer
· SET series double screw extrusion pelletizer
· VI forced mixer
· Mixing machine W series
· Powder machine ZSJ series vibrating screen
· FZ series of crushing granulator
· Chinese medicine grinder
· DWT series of drier for dehydrated vegetables
· Multi-layer belt dryer

Copyright 2013 Chang Zhou Zhizun Machinery Co.,Ltd All Rights Reserved.Design by Reach.
Tel:86.519-88906508 Fox:86.519-88902679 Add:Jiaoxi Changzhou Jiangsu Pro China P.C:213116