Universal grinder installation should pay attention to the problem
   Universal grinder is a high-speed rotary percussive, depending on the structure and force through a combination of different grinding components, can be composed of a turbine, needle stick type, wing plate, half ring half screen type and ring gear type several crushedequipment.
  Material from the hopper by the screw conveyor into the crushing chamber, generated by the high-speed rotation of the rotor (such as leaf and needle bar, toothed, etc.) with a fixed stator (e.g. ring gear) between the strong impact force, shear force by friction be crushed so that the material generated by the strong impact force, shear force, friction, the material is pulverized, the powder is discharged through the sieve machine chamber, the particle sizes obtained through the replacement of the different aperture sieve.
  Universal grinder installation considerations:
  1, universal grinder and power unit should be securely installed. Universal grinder fixed long-term job, it should be fixed on a cement foundation; universal grinder is a mobile operation, the unit should be installed in the chassis made ??with angle iron, and to ensure that the power machine (diesel or electric motor) and Universal crushed the machine pulley groove is rotating in the same plane.
  The universal grinder after installation to check ministries fasteners fastening tighten if loose be. At the same time you want to check the belt tightness is appropriate.
  Universal grinder before starting the first hand to rotate the rotor, check teeth claw hammer and rotor operation is flexible and reliable, shell or without collision phenomenon, the direction of rotation of the rotor is under the machine arrow direction, the power machine and the universal grinder lubrication.
  4, it should not replace the pulley to prevent excessive speed grinding chamber to produce an explosion, or the speed is too low to affect the efficiency of the universal grinder.
  Universal grinder starter should idling 2 ~ 3min, no anomalies before feeding.
  Work to pay attention to a universal grinder functioning, feeding should be uniform to prevent blocking boring car, not to overload of work for a long time. If there is vibration, noise, bearing and body temperature is too high, spray material outward phenomenon should immediately stop check, troubleshooting before they continue to work.
Related News:
· Innovation, energy saving, environmental protectio  
· Vacuum dryer product performance characteristics a  
· Vacuum dryer used for inspection and debugging wor  
· Difficulties and reasons cannot start mixing machi  
· The correct operation method using vacuum dryer  
· Development advantages and characteristics of dome  
· The difference between the special vacuum dryer an  
· Detailed description of each component characteris  
· The dominant position in the whole vacuum dryer dr  
· Trough type mixer sometimes appear large area leak  
Related Products:
· PGL Spray Drying Granulator
· High speed mixer
· SET series double screw extrusion pelletizer
· VI forced mixer
· Mixing machine W series
· Powder machine ZSJ series vibrating screen
· FZ series of crushing granulator
· Chinese medicine grinder
· DWT series of drier for dehydrated vegetables
· Multi-layer belt dryer

Copyright 2013 Chang Zhou Zhizun Machinery Co.,Ltd All Rights Reserved.Design by Reach.
Tel:86.519-88906508 Fox:86.519-88902679 Add:Jiaoxi Changzhou Jiangsu Pro China P.C:213116