Parts of the operation of the rock particles briefing
Swing particle machine
  Swing the particle machine is mainly composed by the base, reducer, hopper, the particle manufacturing equipment and piston oil pump, etc..
  Reversing the movement of rock particles machine due to the mechanical action. When this movement again and again, by the left and right pinch clamp teacher network 5 close to the wheel rim and the rim at the mesh hole like soft material into the extrusion rim of the soft material pressed against the sieve extrusion original material in the hole. This principle is the imitation artificial hand rubbing pressure sieve, leaving the soft material through a sieve made ??of particles of the process.
  The rock particles electromechanical machines belt drive driven decelerator worm variable speed gear Gong. The motor skill transmission on the one hand, on the other hand worm gear crank rotation so with the rack to do Xu complex movement up and down. Rack up and down in reciprocating engages the gear to do the rocking motion. Worm on the crank eccentricity can be adjusted. Changing the eccentricity of the crank axle swing amplitude attributable i.e. change.
  When the machine is running rock particles, feeding quantity and screen position of the elastic direct impact on the quality of the prepared particles. The small hopper feeding amount sieve central relatively loose, since the drum is rotated to increase the resistance of the soft material of the drum, and the obtained particles coarse particles and close; contrary, the fine particles of the prepared granules and soft. Obtained particles can increase the concentration or amount of the cooked mixture, or to increase the number of the soft material through the sieve, are hard.
  Average particle size of the particles in the rock particles mechanism is also uniform, there are conducive to uniform drying wet granulation. Its main feature is the rotational speed of the rotating drum can be adjusted, detachably easily mesh, can appropriately adjust its tightness. The driving mechanism is totally sealed in the body, along with conditioning systems. Parts of life. However, due to granulation by roller straight oppression mesh made ??of grain, the material the mesh extrusion pressure and friction. Using metal mesh, easy to generate the metal shavings pollution punishment. Nylon mesh easily damaged frequent replacement, and attention should be used.
Related News:
· Innovation, energy saving, environmental protectio  
· Vacuum dryer product performance characteristics a  
· Vacuum dryer used for inspection and debugging wor  
· Difficulties and reasons cannot start mixing machi  
· The correct operation method using vacuum dryer  
· Development advantages and characteristics of dome  
· The difference between the special vacuum dryer an  
· Detailed description of each component characteris  
· The dominant position in the whole vacuum dryer dr  
· Trough type mixer sometimes appear large area leak  
Related Products:
· PGL Spray Drying Granulator
· High speed mixer
· SET series double screw extrusion pelletizer
· VI forced mixer
· Mixing machine W series
· Powder machine ZSJ series vibrating screen
· FZ series of crushing granulator
· Chinese medicine grinder
· DWT series of drier for dehydrated vegetables
· Multi-layer belt dryer

Copyright 2013 Chang Zhou Zhizun Machinery Co.,Ltd All Rights Reserved.Design by Reach.
Tel:86.519-88906508 Fox:86.519-88902679 Add:Jiaoxi Changzhou Jiangsu Pro China P.C:213116