|Rock particles can be wet powder made of desired particle, can also be massive in material is crushed into the required particle. Also can be irregular for some sticks and fragile, easy to loose, brittle materials, the use of broken broken up, as a former milling procedure. Not suitable for solid, liquid, paste or ground use. Rock particles is not suitable for semi solid, liquid, paste or wear with. Rock particles machine is a mechanical transmission, the friction force, roller rotation, powdery material in the rotating drum is rotating, the effect from the screen holes is discharged out of the machine. Tight and loose and adjust the screen drum speed, grain size and density control of particles in some extent.
Swing granulator granulation particle machine widely used in pharmaceutical, food, health care products, chemical, fertilizer, building materials, smelting industry. Particle machine factory production, can be used for powder processing, feed processing, chemical processing, food processing, applicable to the pharmaceutical, chemical, feed, food and other industries to create a variety of particles. Rocking granule machine is only used for grain production, not suitable for solid, liquid, paste or ground use.
The main characteristics of particle machine swing:
1 low energy consumption, low noise, high yield, yield up to 700kg for one hour, convenient operation, convenient repair.
2 the roller granulation.
3 roller easy disassembly, convenient cleaning. Easy to change.
4 mechanical transmission system is totally enclosed in the machine body, safe operation.
5 parts in contact with the local made of stainless steel, durable.
How to correctly operate swing particle machine?
The preparation of materials: dry powder should be added to the amount of water for mixing, wet material for proper drying, material in bulk, can not be processed. The material is dried powder, can be directly spray on top, slightly stirred material can be prepared particles. A small amount of water is too much, the drying surface material can also be used directly rock particles mechanism of grain. When the material is massive, not necessary to block material crushing or other processing, can be directly used to swing mechanism of grain particles. If we do not know to do the sieve mesh particles, can be used to screen the manual granulation.
Machine ready: before driving the machine box oil table all refueling time, can improve the service life of the machine. Remove the lower cylinder glass cover, the replacement of the appropriate screen, will the handwheel of the sting wheel adjusted to the proper position, empty machine running 1-2 minutes, no abnormality after the boot operation. The worm gear case oil every store in March a new oil once, can improve the service life of the machine.
The 1 method of use: start the machine, mix into the bucket, the swing rotary drum, squeeze the material particles are formed through the screen.
A powder bucket as powder stop, must not be hand to shovel, so as to avoid the injury accident, application of bamboo spatula or stop work.
B such as crushed pieces, should gradually joined, not filled, so as to avoid the pressure is too large, and the screen vulnerable.
Before the C operation will be the material cylinder glass cover installed, to prevent the particles.