Boiling dryer in the production process should pay attention to the problem of equipment lubrication
Boiling drier air passes through the heating after purification, by induced draft fan to import from the bottom, through the hole hopper stencil. In the studio, formed by mixing and fluidization negative pressure, water is evaporated and removed quickly, fast drying material.
  Boiling the drive shaft neck lubricating machine dryer reasonable and dynamic pressure sliding surface. To improve the service life of rolling machine game measures. The data therefore must choose a reasonable lubrication, reduce power consumption. Establish the necessary lubrication system.
  Boiling drier lubrication
  Bending machine is lubricated by an oil cup respectively according to the working conditions. Gear, turbine, the lifting screw rod, movable bearing and tilt adjustment mechanism of wire rod, using artificial periodic lubrication, artificial gas and box lubrication in three ways. Each roller shaft and drive shaft for the oil lubrication. Gear and bearing reducer lubrication with oil in the box body splash to achieve
  Boiling drier lubrication system and the matters needing attention
  Boiling dryer before starting. Each lubricating point must be adequate lubrication. Boiling drier in the continuous working situation. The lubrication system should be considered boiling dryer to album work system and accord with the running circumstances. Cup and artificial lubrication oil generally two hours a. Shall not exceed six months at most. Replacement of a boiling dryer speed reducer box body lubricating oil is generally three months. Every year the whole boiling dryer cleaning a lubrication system.
Related News:
· Innovation, energy saving, environmental protectio  
· Vacuum dryer product performance characteristics a  
· Vacuum dryer used for inspection and debugging wor  
· Difficulties and reasons cannot start mixing machi  
· The correct operation method using vacuum dryer  
· Development advantages and characteristics of dome  
· The difference between the special vacuum dryer an  
· Detailed description of each component characteris  
· The dominant position in the whole vacuum dryer dr  
· Trough type mixer sometimes appear large area leak  
Related Products:
· PGL Spray Drying Granulator
· High speed mixer
· SET series double screw extrusion pelletizer
· VI forced mixer
· Mixing machine W series
· Powder machine ZSJ series vibrating screen
· FZ series of crushing granulator
· Chinese medicine grinder
· DWT series of drier for dehydrated vegetables
· Multi-layer belt dryer

Copyright 2013 Chang Zhou Zhizun Machinery Co.,Ltd All Rights Reserved.Design by Reach.
Tel:86.519-88906508 Fox:86.519-88902679 Add:Jiaoxi Changzhou Jiangsu Pro China P.C:213116