|The internal structure of trough type mixing machine is mainly composed of five components:
1, stirring speed reducer
The stirring speed reducer system as the main transmission structure trough type mixing machine, it is located right groove type mixing machine, work by means of motor in the machine base through the triangle belt transmission worm and worm wheel, gear drive the mixer to 1:40. Worm gear
The shaft is hollow and is equipped with a fixed key, can make the stirring paddle free assembly and disassembly. Reducer topped with 2 ring screw, for assembly and disassembly, installation and use. The end cover is provided with a screw for high speed stirring paddle position, has been adjusted in the factory, generally in use do not have to adjust.
2, mixing tank
Mixing tank mixing machine is U shape, made of stainless steel, installed inside the impeller, it lying in the stirring speed reducer and the pouring speed reducer.
3, the pouring speed reducer
The pouring speed reducer for positioning control mixing groove angle, it is located on the left side groove type mixing machine, when the device is in the frame of the motor through a triangle belt transmission worm, worm gear, drive the mixing tank to rotate in a certain angle range, so that the mixture once poured out.
4, the base and motor device
The base is an integral structure, the motor is arranged on both sides of the base plate in the groove in the mixer, the motor can be adjusted on the screw, the triangle can be elastic, maintain the momentum.
5, electric control box
Electric control box is the control groove type mixing machine movement